Furnace Replacement Rebate Program

When I was researching the boiler we got last fall, I found some information about a Rebate Program in the state of Connecticut. I emailed for more information and at the time, it was an unfunded program that was still being established. The Office of Policy and Management was collecting names of people that were interested in the rebate, with the promise to send out the paperwork once they got funding. Well, a week or two ago, I got a packed in the mail with all the forms I needed to fill out, and I strongly encourage anyone thinking of replacing their furnace or boiler to look into this. It's a simple form, and as long as your new unit is better than 84% efficient (I'm not sure why anyone would purchase a new system if it WASN'T at least that efficient, it will qualify for this rebate, which is a maximum of $500.

Here is the information from the website, but by all means head on over, sign up, and recoup some of your expenditures. All of the forms are now right there online for you!

The Furnace Replacement Rebate Program is an incentive program for Connecticut households to replace their existing residential furnaces or boilers with more energy efficient models. The program is designed to provide rebates of up to $500 to households that purchase and install replacement natural gas, propane or oil furnaces and boilers between July 1, 2007 and June 30, 2017. Rebates will be available for replacement natural gas furnaces or boilers that meet or exceed Federal Energy Star standards and propane and oil furnaces and boilers that are at least 84% efficient. The amount of the rebate will decrease as your income rises above a certain level. The Office of Policy and Management, authorized by Connecticut General Statutes Section 16a-46e, is responsible for implementing this Furnace Replacement Rebate Program.

The Furnace Replacement Rebate Program has a retroactive start date of July 1, 2007. Furnaces or boilers purchased and installed prior to that date will not qualify for a rebate.

For further information call 1-866-940-4676.

Solar Panels

Get comfortable, this is going to be a long one.

About a year ago, Nicole and I were about to sign up for a Green Architecture class at Wesleyan University, in the Graduate Liberal Studies Program in which we are both enrolled. We had already done a lot of research into green building materials, some of which you have read about in past posts, some still to come. But a major investment was sort of in the works. We knew we wanted to do something big, and for our age, I think seriously considering a photovoltaic (PV) system a year after buying our first hybrid car was certainly big enough.

By the time the summer semester began, Nicole had already made some phone calls for information about different systems and we had a few sales reps come out to the house. The problem is, the peak of our roof runs North-South, meaning the slanted sides of the roof face due East and West, the exact opposite of what you want for a PV system. We have dreams of ripping off the back half of the roof and putting a full dormer across the back side of the house, and while trying to draw up plans for that, we went to great lengths to try to design the new roof in such a way as to make it somehow face South. It just wasn't happening. The best we could come up with was about a 2-degree pitch to the South, partially blocked by the peak of the roof during the latter half of the afternoon, and the ideal pitch for PV is 33-degrees, due South.

The last company we talked to (we didn't need to go any further) was Solar Wrights, who have an office in Stonington, CT, among others. Dave Cohen (email) was our sales rep and we now consider him a friend. Dave took a look at our roof and really listened to our ideas. He was unlike other people we had talked to, in that he really worked WITH us to design a system that we would be happy with.

Dave has a ground-mounted PV system at his house and noticed our large, mostly unshaded backyard. We hadn't considered a ground- or pole-mounted system but as soon as he suggested it we were on board. Our whole yard is a work in progress, much like the house, and Nicole and I both find solar panels to be gorgeous additions to a property, and not something to be hidden up on the roof necessarily. Everyone that has seen them so far agrees.

Anyway, We signed a contract in July, 2007 for a 4.2 kilowatt pole-mounted, tilt-able PV system that will produce, on average, all the electricity our house will use. We are still on the grid, and there is no electricity storage system, like a bank of high capacity batteries. We don't have the space (or money) for something like that, and in all honesty we don't often lose power, so going "off the grid" is not really a concern of ours. There will be months that our electricity bill will be a couple of dollars and others that we will have a credit balance. The credits can carry over month after month, in case we continually produce more than we use.

After beginning the process with Solar Wrights, we had other projects in the works like overhauling our heat and hot water systems. The new tankless hot water heater we got was strategically electric, so that it will basically run for free.

At the same time, however, we had to figure out how the hell to pay for the PV system. Without going into too many numbers, it is very a pretty expensive forray. Almost prohibitively expensive, in fact. Nicole and I do not have a lot of money, far from it. She works part time jobs and I work for a university, both of us coming from middle class families and both have parents that have worked their asses off to give their children better opportunities than they had growing up. We have both learned the importance of saving money and living fiscally responsible. All that said, this is not a financial commitment to be taken lightly. Luckily, the Connecticut Housing and Investment Fund offers an Energy Conservation Loan, which we applied for. It is a 10-year loan and is based solely on debt-to-income ratio, and does not take into consideration any jointly held assets. It does put a lien against the property, however, and would need to be paid off prior to selling the house, if we were ever to sell. The maximum loan amount is $25,000, which may or may not cover the cost of a PV system, depending on the size of it. Think of it like a home equity loan. I think the interest is tax deductible as well, we'll find out next year.

There is also a federal tax credit for PV systems installed before the end of 2008 as described here:

Tax credits are available for qualified solar water heating and photovoltaic systems. The credits are available for systems "placed in service" from January 1, 2006 through December 31, 2008. The tax credit is for 30% of the cost of the system, up to $2,000. This credit is not limited to the $500 home improvement cap.

Of course, like almost every tax credit, the maximum credit is nowhere near being 30% of the cost of the system. But hey, it's still a size-able credit nonetheless.

The only way we ever could have afforded this system, aside from the CHIF loan, was because of the rebate program offered by the CT Clean Energy Fund. They offer rebates for up to 40% of the installed system, based on the efficiency of the panels. The efficiency is determined by the number of modules, size and orientation of the solar array, shading, etc.

After being approved for the loan, Solar Wrights has really taken care of the rest, including the rebates. Tonya Morgan has been extremely helpful with all the paperwork, and her husband Charlie did an amazing job project managing the installation. This has been strange for Nicole and I, since almost every project we have done on the house we have done ourselves or with the help of our parents, siblings, and friends. Anyway, when we signed the contract with Solar Wrights, we were aware of the full cost of the system, but really never had to be concerned with the full cost. Your solar installer will take care of the rebates, and they deal directly with the CCEF before even determining the amount you are responsible for. By that I mean, we are not paying the full amount and then getting a chunk back in rebates, we just pay the post-rebate amount, and in our case there was a deposit and then 3 installment payments during the course of the process.

Installation: The system consists of two poles, set in a LOT of concrete. The concrete bases required 5' square holes to be dug 9' deep. The plywood forms were put in the holes and leveled, with the poles leveled within the forms. We also needed to dig an 18"-deep trench from the array to the house, for the conduit that would carry the wiring into the basement. This process made a much bigger mess of the yard than I had envisioned, but our yard was already kind of a mess anyway, so who cares. It's worth it.

Equipment: On each of the two poles are ten 210-watt SunPower solar panels, for a total of 20 panels. Each set of ten is independently tilt-able, so that in the winter we can tilt them more upright to catch more of the sun's rays, which is lower in the sky. We'll tilt them more horizontal in the summer months. And then in the basement is a SunPower 4000 inverter, which will convert the DC electricity produced by the panels into AC power that can go into the grid. There is also a meter in the basement so we can see how many kWh we are producing on a daily basis, as well as a shutoff switch next to the main panel, so we can turn off the power coming out of the inverter in case we need to work on the electric panel. There is another shutoff switch on the outside of the house so that if Connecticut Light and Power needs to work on the power lines, they can shut down the panels so that they won't backfeed into the system and electrocute the workers.

Long story short, this is a pretty complicated and expensive process, but if we can do it, anybody can. Before beginning this process, we really didn't know that much about PV systems, but it is such an exciting step to take that we are both happy to talk to everyone we know about it, share what we know, and hopefully make it less complicated for anyone else considering doing this.

Heating, part 1

We live in Connecticut, which is a pretty cold climate. Today it snowed and sleeted and it has been down in the teens at night a few nights. Folks in this part, and other parts of the country are cranking up the thermostats these days, and with it the levels of pollution. it just so happens that of the some 8 million homes heated with oil in the United States, 6 million of those are hear in the Northeast. If you are in a position of having to replace your home heating system, as Nicole and I were this year, there are several options for how to heat your house.

Chances are if you have duct work in the walls for a forced air system, you will probably stay with that kind of system, as you would if you already had hot water baseboard radiators throughout. There are different levels of expenses that people can look at practically. For example, We converted a garage into a dining room. That process allowed us to put in a zone of radiant heat, which is essentially a plastic tube that snakes back and forth in the concrete, and as the hot water flows through the tube, it heats up that mass of concrete and warms everything in the room, not just the air. We have found this room to be far more comfortable, even when set at a lower temperature than the rest of the house. It is possible to retrofit floors with electric radiant heat, where you basically attach something to the underside of the subfloor from the basement, and the heat radiates up through the floor.

When we bought our house, we had the old cast iron radiators and an oil boiler dating back to the 1970’s. While the iron radiators did put off a lot of heat, they were not very attractive and had years of gunk caked into them. We decided to send those to the scrap yard, where they no doubt were recycled, and replaced them with low profile Slantfin® radiators we bought at Home Depot.


The issue of replacing the boiler became a pretty big research project. We are fed up with oil and made the decision early on to get rid of that whole disgusting behemoth of a tank in the basement and the sickly old boiler. The last time we had it cleaned we were told the fire box was cracked, which I guess meant its days were numbered. Since we live in a colder climate, and are renovating and not building new, our solar and geothermal heating options were somewhat limited, not to mention we have budgeted other large scale projects that I will talk about in future posts. We had to stick with burning something to heat the water that goes through the radiators and radiant floor, and the other most common options besides oil are natural gas (preferred), propane (not as good as natural gas), and there are wood pellet stoves that can do this job as well.

After a lot of phone calls we determined that natural gas is not in our street, and because of that it was ruled out, unfortunately. It is the cleanest burning of the home heating fuels, and boilers these days can get up into the 95% efficiency range (which happens to qualify for a $150 federal tax credit right now). We settled for LP, or liquified propane, which is slightly worse than natural gas, but nowhere near as bad as oil. I will post some statistic in the days to come to corroborate these claims. We got a Buderus 142/30 propane boiler, which is actually a natural gas boiler that we had to change one small part on to make it burn propane. It came with that part. We just missed the federal tax credit because this model, which produced adequate BTUs to heat our house and then some is 94.7% efficient. This is a really slick unit that makes virtually no noise. I mean that too. If I am standing next to it while it is running, the only thing I hear is the circulator pump installed on the wall next to the boiler.

Wall-mount is a wonderful thing. Hey, so I have to run but will be back with much more on this topic and more soon.